Back to top

Max All®

Products

Max All®

MAXALL® is an all surface non-stick coating that provides an invisible barrier to prevent otherwise difficult to remove soils from adhering.This greatly reduces labor and time needed when the treated surface is cleaned, without requiring the use of harsh or toxic cleaners.

MAXALL® may be applied to any surface not damaged by water. This no odor formula is nontoxic and may be used safely indoors or out, without ventilation requirements.

Recommended For Use On:
All types of metals, plastic, painted surfaces, glass, ceramic, and any surface not effected by water.

MAXALL® is an all surface non-stick coating that provides an invisible barrier to prevent otherwise difficult to remove soils from adhering.This greatly reduces labor and time needed when the treated surface is cleaned, without requiring the use of harsh or toxic cleaners.

MAXALL® may be applied to any surface not damaged by water. This no odor formula is nontoxic and may be used safely indoors or out, without ventilation requirements.

Recommended For Use On:
All types of metals, plastic, painted surfaces, glass, ceramic, and any surface not effected by water.

Demonstrations

SKU:
maxall-onegallon
Title:
Max All 1 gallon
Price: 
$50.00
Features & Benefits: 

MAX ALL® is fully cured and dried in just a few short minutes, and is totally waterproof so it “stays put” even in heavy rain/snow situations.

Downloads: 
AttachmentSize
PDF icon MAX ALL_Data Sheet.pdf475.63 KB
PDF icon Max All_SDS.pdf305.07 KB

Specifications

Effective On: 
May also be used on brick, cement, grout, terrazo, clay tile, marble, and/or any other porous natural or man-made stone. Suitable for bare wood, wood products, as well as varnished or other wood finishes. May also be used on semi-gloss to high gloss paint
Flammability: 
Dry film is non-flammable.
Storage: 
Stores between 40º F and 130ºF. DO NOT FREEZE. If frozen, thaw and remix before using. Keep out of the reach of children.
Biodegradable: 
Yes
Consistency: 
Thin liquid for maximum square foot coverage.
Shipping: 
Not regulated, D.O.T. Proper shipping name: Cleaning Compound N.O.S., Class 55.
Use Temperatures: 
40 F- 130 F. Do not apply in freezing or near freezing temperatures.
Coverage: 
Non-porous, smooth surfaces: 1500 - 2500 sq. ft./gallon. Porous (wood, cement, brick): 250 - 400 sq. ft./gallon
Note: 

NOT RECOMMENDED FOR USE ON:

Flat/low gloss air dry paints, smooth walking surfaces such as tile floors or painted concrete and wood floors, or on surfaces that may be painted or repainted in the future.

Features & Benefits: 

MAX ALL® is fully cured and dried in just a few short minutes, and is totally waterproof so it “stays put” even in heavy rain/snow situations.

General Instructions: 
  • Surface to be treated should be free of all oils, grease, heavy soils, to insure maximum effectiveness. 
  • Apply by spray, pump spray, brush, sponge or roller, 
  • Apply a THIN UNIFORM COAT.
  • On smooth surfaces apply at the rate of 1500-2000 sq. ft./gallon. On porous surfaces such as cement, brick or wood apply at the rate of 250-400 sq. ft./gallon.
  • For maximum gloss and appearance, buff out the dried coating with a lint free cloth or buffing pad/drill for larger areas.
  • NOTE:  Best results are obtained when applied with a dampened cloth and spread uniformly over the surface to be treated. APPLY 3 THIN COATS.

Safety Instructions For Use:

  • Protect all exposed skin areas with chemical resistant covering.
  • Always wear protective eyewear and chemical resistant gloves during handling and use.
  • If product gets on skin, wash off immediately. If product gets in eyes, flush with water for 15 minutes.
  • Respirator is recommended if sprayed.
  • FOR PROFESSIONAL USE ONLY.  
Dimensions: 
10.5 × 7 × 10 in
Physical weight: 
11 lb
Note: 

NOT RECOMMENDED FOR USE ON:

Flat/low gloss air dry paints, smooth walking surfaces such as tile floors or painted concrete and wood floors, or on surfaces that may be painted or repainted in the future.