Back to top

Shield Max®

Products

Shield Max®

SHIELD MAX® is an invisible water-carried all-weather long-term protection, formulated for most types of surfaces.

Provides extra strong protection against spray paint and marker or felt tip pens. Protects against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surfaces to breath. Correctly applied, life expectancy against graffiti is approximately 5 years. Prevents graffiti from penetrating into substrate. A sacrificial protection coating will always need to be re-applied after every removal process to re-protect the surface.

SHIELD MAX® is an invisible water-carried all-weather long-term protection, formulated for most types of surfaces.

Provides extra strong protection against spray paint and marker or felt tip pens. Protects against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surfaces to breath. Correctly applied, life expectancy against graffiti is approximately 5 years. Prevents graffiti from penetrating into substrate. A sacrificial protection coating will always need to be re-applied after every removal process to re-protect the surface.

Demonstrations

SKU:
shieldmax-oneqallon
Title:
Shield Max 1 gallon
Price: 
$100.00
Features & Benefits: 

DRYING PERIOD

The protected surface will be water and graffiti resistant after 2 hours and dry after 4 hours. Ultimate protective effect will be achieved after 72 hours.

APPEARANCE

Transparent, mostly invisible dependent on type of surface. UV resistant. Weather, water and graffiti resistant. NOTE: Some building materials can darken or become shiny.

Downloads: 
AttachmentSize
PDF icon SHIELD MAX_Data Sheet.pdf482.21 KB
PDF icon Shield Max_SDS.pdf143.45 KB

Specifications

Flammability: 
Nonflammable, non-combustible.
Storage: 
Stores between 40°F and 130°F. DO NOT FREEZE. If frozen, thaw and remix before using. Keep out of the reach of children.
Biodegradable: 
Yes
Consistency: 
Use concentrated. SHAKE WELL before use.
Shipping: 
Not regulated, D.O.T. Proper shipping name: Cleaning Compound N.O.S., Class 55.
Use Temperatures: 
Ideal surface temperatures are between 50°F - 95°F. Relative humidity is not to exceed 95%
Volatility: 
Very low rate of evaporation. Ventilation required in confined areas.
Coverage: 
Coverage varies according to the porosity of the surfaces and how much the material soaks up the product by capillary action. Concrete, rough cast cement, bricks, etc: 200-400 square feet per gallon. Sandstone, cinder blocks and other absorbent surfaces:
V.O.C.'s: 
.4 lbs./gal., 50 grams/liter H. A. P. S. -none.
Note: 

SAFETY INSTRUCTIONS FOR USE.

  • Always wear protective eyewear and chemical resistant gloves during handling and use.
  • Protect all exposed skin areas with chemical resistant covering.
  • If product gets on skin, wash off immediately. If product gets in eyes, flush with water for 15 minutes.
  • Use respirator if sprayed.
  • FOR PROFESSIONAL USE ONLY.
Features & Benefits: 

DRYING PERIOD

The protected surface will be water and graffiti resistant after 2 hours and dry after 4 hours. Ultimate protective effect will be achieved after 72 hours.

APPEARANCE

Transparent, mostly invisible dependent on type of surface. UV resistant. Weather, water and graffiti resistant. NOTE: Some building materials can darken or become shiny.

General Instructions: 

APPLICATION INSTRUCTIONS

Preparation: Clean off both graffiti and other contamination, such as traffic dirt, wax, oil and paint residue, etc. from substrate. Mask and protect windows in a suitable manner. Ideal temperature for external application should be between 50 F-95 F. Minimum temperature is 47 F. Relative humidity must not exceed 95%.

Exterior Protection: Shake or stir product well prior to use. SHIELD MAX can be applied with an airless sprayer, hand trigger sprayer, pump sprayer or roller. The protection is applied 2-3 times. NOTE: Allow some intermediate drying. SHIELD MAX® can be applied to a damp, not wet, surface. Runs and/or excessive application can easily be washed off with water, following completion of work.

Interior Protection: Painted substrate can be protected using a squeegee, brush, roller or with low pressure spray in combination with a squeegee. The protection is applied three times.

EXTERIOR REMOVAL INSTRUCTIONS

Method 1 - Normal Substrate:
Remove graffiti with high pressure hot water at 1000-2000 PSI and 190 F. In difficult case GRAFFITI SOLUTIONS Graffiti Removers are used in a conventional manner. Re-protect cleaned area.

Method 2 - Sensitive Substrate:
Apply SHADOW MAX® with a low pressure sprayer. Allow a few minutes for the remover to act and then rinse off with hot water at 800-1200 PSI and 190 F. The method is most suitable when substrate is brittle.

INTERIOR REMOVAL INSTRUCTIONS

Painted Substrate: Dampen the area with SHADOW MAX® and wipe off the graffiti with cloth. If possible, use high pressure hot water and wet vac machines.

Porous Substrate: Rinse off with hot water and wet vac. When removing graffiti, the protective coating is also normally removed. Re-protect 2-3 times with SHIELD MAX®.

Dimensions: 
10.5 × 7 × 10 in
Physical weight: 
11 lb
Note: 

SAFETY INSTRUCTIONS FOR USE.

  • Always wear protective eyewear and chemical resistant gloves during handling and use.
  • Protect all exposed skin areas with chemical resistant covering.
  • If product gets on skin, wash off immediately. If product gets in eyes, flush with water for 15 minutes.
  • Use respirator if sprayed.
  • FOR PROFESSIONAL USE ONLY.